China Spicer Slip Yoke and Tube Shaft drive shaft coupling

Warranty: 3 several years
Applicable Industries: Creating Content Stores, Manufacturing Plant, Farms, Cafe
Personalized support: OEM, ODM
Composition: cross
Materials: 20Cr or 20CrMnTi equipment steel, FORING
Working Angle: sixty
CE: Certifation
Dimensions: 151
Variety: 2- 3- 128KX
Model: 10- 3- 122X
Packaging Information: cartons+wood pallets—-Outer packing
Port: Shanghi Or HangZhou port

Solution Title: Slip stub, Slip yokes, Slip tube yoke, Conclude yoke specification:
2- 3- 128KX , 2- 3- 7681KX , 3- 3- 118KX , 4- 3- 1241KX, ten- 3- 122X, 2- 1421KX, 2- 3- 8KX34.9 x sixteen Spline50.8×2.446.three161fifty four2-3-128KX2two-40-2431KX2seventy six.2×2.oneseventy two.three189542-3-128KX2two-40-1521KX288.9×1.6585.9172542-3-128KX22-40-2911KX21330 Sequence E=ninety eight.6 D=26.9 USE Package 5-213X & 5-273X & 5-618X & SPL25-1X34.9 x 16 Spline76.2×2.1seventy two.threeone hundred ninety702-3-14491KX2-forty-1521KX33.3 x 19 Dependent on twenty Involute Splineseventy six.2×1.65seventy three.2219402-3-13241X2-40-2751X1410 Series E=112.8 D=thirty.2 USE Kit 5-160X & 5-462X & 5-641X38.1 x 16 Spline76.2×2.172.three193seventy twothree-3-118KX1three-forty-1901KX188.9×2.one85197723-3-118KX1forty-1674KX11480 Collection E=112.8 D=34.8 USE Kit 5-188X & 5-263X & SPL55-1X & SPL55X39.9 x sixteen Spline88.9×2.oneeighty five20563three-3-1601KX13-forty-1571KX1550 Series E=133.4 D=34.8 USE Package 5-155X & 5-275X & SPL70-1X & SPL70X44.45 x sixteen Spline88.9×2.four84.4207sixty three4-3-1241KX1four-forty-761KX90.0×3.84.four207634-3-1241KX1four-40-761KXSPL90 Collection E=136.7 D=forty one.2 USE Package SPL90-1 & SPL1X1610 Collection E=a hundred thirty five. D=47.7 USE Kit 5-279X & 5-438X & 5-674X50.8 x sixteen Spline101.6×3.4ninety five.one310.eightone hundred twenty five5-3-2261KX5-40-1051KX1650 Collection E=151.6 D=forty one.2 USE Package 5-165X50.8 x 16 Spline88.9×4.eighty one.5278.6113five-3-2341KX24-forty-921KX21710 Sequence E=154.7 D=forty nine.3 USE Kit 5-280X & 5-515X & 5-675X63.5 x sixteen Spline114.3×3.4107.eight336one hundred thirty6-3-2651KXsix-40-621KX1810 Collection E=191.8 D=49.3 USE Kit 5-281X & 5-510X & 5-676X76.2 x sixteen Spline114.3×3.4 107.8302.oneeighty four6.5-3-1351KXsix.5-40-201KX114.3×3.4107.8355.1126.six.5-3-1371KX6.5-forty-191KX114.3×6.fiveone hundred and one.7355.one126.six.5-3-1371KX8-40-one zero oneKX1510 Series (Mercedes Benz GW2) E=ninety eight. D=38. USE Package 5-12213XS50.8 x sixteen Splineninety.0×3.sixty four.1272sixty03-339XS40-1445XS1680 Series (Mercedes Benz GW5) E=130. D=45. USE Kit 5-121XST60 Collection (Scania) E=159. D=44. USE Kit 5-12276X50.8 x sixteen Spline88.9×4.82.one2711XL2T70 Sequence (Scania) E=177. D=fifty. USE Kit 5-12278X62. x 12 Splineninety five.0×5.eighty five.6 306ninety five03-334XL240-172243-17234XL21740 Sequence (Albarus) E=172. D=forty eight. USE Package 5-12062X65. x 26 Angular Spline95.0×5. 85.631312103-514XLforty-1727XL1780 Series (Albarus) E=177. D=fifty. USE Package 5-12278X63.5 x 16 Spline95.0×5.eighty five.630511203-386XL140-1490XL1

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.
splineshaft

Disc brake mounting interfaces that are splined

There are two common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only six bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, three spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China Spicer Slip Yoke and Tube Shaft     drive shaft coupling	China Spicer Slip Yoke and Tube Shaft     drive shaft coupling
editor by czh 2023-02-21